WANLIN-303
Standalone photoelectric smoke alarm family
Review standalone, 433 MHz, LoRa or 4G candidates only after the exact hardware and radio version is identified.
Direct answer
What does standalone detection mean?
An export standalone smoke alarm detects smoke and provides a local audible warning without requiring a conventional fire alarm control panel. For IoT monitoring, buyers should first define the protected space, required local alarm behaviour, reporting method, power arrangement and destination-market evidence.
This page is written for IoT platform operators and retrofit monitoring integrators. It is a product-family selection resource, not a claim that every variant has the same approval, radio module or market access.
Model reference image
Review the exact configuration, not only the family name
The image identifies a WANLIN-307 family reference. Radio, power, label and evidence scope can differ by controlled configuration; confirm the SKU/BOM before using any formal product or compliance statement.
Open the WANLIN-307 product passport · Review the public evidence center
Verified manual data
WANLIN-307 documented configuration
Evidence scope: WANLIN-307 user manual, Ver 1.0. Documented manual configuration only; radio, platform, power and market variants require separate SKU/BOM confirmation.
| Detection principle | Infrared photoelectric smoke sensing with MCU processing |
|---|---|
| Rated working voltage | DC 3 V |
| Battery capacity | 2400 mAh |
| Standby current | ≤ 6 μA |
| Alarm current | ≤ 100 mA |
| Sound pressure | > 80 dB(A) at 3 m directly in front |
| Operating temperature | −10 °C to +50 °C |
| Relative humidity | ≤ 95% RH at 40 °C ± 2 °C |
| Alarm output | Audible and visual alarm |
| Low-voltage indication | Below 2.7 V; indicator and one chirp about every 40 s |
| Normal indicator | Indicator illuminates about every 40 s |
| Approximate weight | 140 g including battery |
| Manual-listed execution standard | GB 20517-2006 |
| Installation reference | GB 50116-2013; final layout must follow project design requirements |
Important: “GB 20517-2006” is presented here as the execution standard stated by this manual. This wording is not a third-party certificate claim and does not establish destination-market acceptance. The manual also advises against use where relative humidity exceeds 95%, air speed exceeds 5 m/s, or heavy dust, water mist, steam, oil mist or corrosive gas is present.
Site-specific planning lens
How does Cloud Fire Alarm Monitoring Platform affect selection?
Existing site context: Find practical guidance on Wanlin Fire cloud fire alarm monitoring platform, including product selection, system planning, OEM/ODM service and export project support. Use that context to define the application; it does not replace model-specific technical or compliance review.
The enquiry should state country, building use, quantity, sensing functions, communication preference, packaging language and target schedule.
Ask for the current report or certificate scope, product photographs, rating-label artwork and manual revision so the reviewed product can be compared with the ordered product.
For this site's IoT monitoring focus, the planning lens is “Cloud Fire Alarm Monitoring Platform.” Start with the decision that changes the architecture most: local alarm only, or local alarm plus remote event reporting.
A retrofit project should record mounting constraints, existing network availability and whether the buyer expects a self-contained device or integration with a wider platform.
Last reviewed: 2026-11-02 · Reviewed by Wanlin Fire Equipment for product-family and evidence-boundary consistency.
Which evidence should an importer request?
- Identify the destination market
- Freeze the exact configuration
- Match evidence to the configuration
- Review labels and instructions
- Approve the production reference
How do the Wanlin model families differ?
WANLIN-307
Connected standalone smoke alarm family
Candidate configurations may include standalone, 433 MHz, LoRa, 4G or NB-IoT; availability and evidence must be confirmed per SKU/BOM.
WANLIN-309
Wireless reporting smoke alarm family
Use when the project requires a local alarm plus a defined reporting path; verify gateway, network and destination-market requirements.
WANLIN-370
Combination alarm reference
A smoke/heat/carbon-monoxide combination concept is not interchangeable with a smoke-only alarm; confirm the required sensing functions first.
Answers for buyers
Standalone smoke alarm questions
Are LoRa, 4G, NB-IoT and 433 MHz versions equivalent?
No. They represent different communication paths and may use different hardware, gateways, network services and regulatory evidence. The exact SKU or BOM must be confirmed before quotation.
What is the difference between a certificate and a test report?
A certificate states a defined certification scope, while a test report records tests on identified samples or configurations. Neither should be extended to an unlisted model or variant.
When should a combination alarm be selected?
Select a combination concept only when the project explicitly requires its sensing functions. A smoke, heat and carbon-monoxide combination device is not automatically interchangeable with a smoke-only alarm.
Are product-family brochures sufficient for procurement approval?
No. Brochures support initial selection, but formal approval should use model-specific specifications, configuration records, applicable evidence, label artwork and current instructions.
Should importers approve the label before production?
Yes. Review the exact model, legal manufacturer or certificate holder where applicable, ratings, warnings, destination language and document references before production artwork is released.
Request a model-specific export review
Send the destination country, application, quantity, reporting method, preferred power arrangement and required delivery schedule to wanlinfirecontrol@163.com. Recommendations and formal claims remain subject to exact-model evidence review.
Browse product information · Read technical FAQs · Contact Wanlin Fire